C. A. Brebbia

Geoffrey Broadbent

This book contains papers presented at the second International Conference on Eco-Architecture . The original Conference was the first to be held worldwide on the subject of sustainable architecture in order to define what ECO-ARCHITECTURE actually is, i.e. "Harmonisation between Architecture and Nature." The subject has matured in the two years between conferences and the submitted papers can be categorised into Ecological and Cultural Sensitivity, Design with Nature, Resource Conservation and Building Technology, Design by Passive Systems, Case Studies, Rehabilitation and Adaptive Re-use. The affiliations of the authors whether in academia, the professions or industry indicate the very wide international scope and the interdisciplinary nature of the subject.

Harmonisation Between Architecture and Nature

Eco-architecture II

This volume contains papers presented at the Ninth International Conference on Structural Studies, Repairs and Maintenance of Heritage Architecture. The conference provides an ideal forum for professionals in the area to discuss problems and solutions, and exchange opinions and experiences.

Structural Studies, Repairs and Maintenance of Heritage Architecture X

G. A. Keramidas

Proceedings of the 2nd International Conference, on board the liner, the Queen Elizabeth 2, New York to Southampton, June/July 1984

Computational Methods and Experimental Measurements

F. Garzia

M. Guarascio

Organised by University of Rome 'La Sapienza', Italy, Wessex Institute of Technology, UK.

Safety and Security Engineering V

Dragan Poljak

Viktor Popov

This book contains the edited proceedings of the 29th World Conference on Boundary Elements and Other Mesh Reduction Methods, an internationally recognised forum for the dissemination of the latest advances on Mesh Reduction Techniques and their applications in sciences and engineering. The range of topics included in this volume are as follows: Advances in Mesh Reduction; Meshless Methods Techniques; Dual Reciprocity Method, Modified Trefftz Method; Fundamental Solution Method; Damage Mechanics and Fracture; Advanced Stress Analysis and Structural Applications; Plates and Shells; Dynamics and Vibrations; Material Characterisation; Acoustics; Heat and mass Transfer; Fluid Mechanics Applications; Wave Propagation; Inverse Problems and Computational Techniques.

Boundary Elements and Other Mesh Reduction Methods XXIX

A. J. Nowak

Luiz Carlos Wrobel

Proceedings of the First International Conference, Held in Portsmouth, UK, 17-20 July 1990

Advanced Computational Methods in Heat Transfer

Bengt Sundén

Heat Transfer topics are commonly of a very complex nature. Often different mechanisms like heat conduction, convection, thermal radiation, and non-linear phenomena, such as temperature-dependent thermophysical properties, and phase changes occur simultaneously. New developments in numerical solution methods of partial differential equations and access to high-speed, efficient and cheap computers have led to dramatic advances during recent years. This book publishes papers from the Ninth International Conference on Advanced Computational Methods and Experimental Measurements in Heat and Mass Transfer, exploring new approaches to the numerical solutions of heat and mass transfer problems and their experimental measurement. Papers encompass a number of topics such as: Diffusion and Convection; Conduction; Natural and Forced Convection; Heat and Mass Transfer Interaction; Casting, Welding, Forging and other Processes; Heat Exchanges; Atmospheric Studies; Advances in Computational Methods; Modelling and Experiments; Micro and Nano Scale Heat and Mass Transfer; Energy Systems; Energy Balance Studies; Thermal Material Characterization; Applications in Biology; Applications in Ecological Buildings; Case Studies.

Advanced Computational Methods in Heat Transfer IX

J. Dominguez

This best-selling text provides a simple introduction to the Boundary Element Method. Based on the authors' long teaching experience it is designed to convey in the most effective manner the fundamentals of the method. The book is presented in a way which makes it accessible to both undergraduate and graduate students as well as to practising engineers who want to learn the foundations of the technique. Of particular interest is the way in which Boundary Element concepts are introduced and immediately applied in simple, but useful, computer codes to facilitate understanding. A CD with the complete listing of program codes in Fortran is also included.

An Introductory Course

Boundary Elements

Masataka Tanaka

Proceedings of the 8th International Conference, Tokyo, Japan, September 1986

Boundary Elements VIII

A. Klemm

This book contains papers to be presented at the Sixth International Conference on the topic. Materials modelling and characterisation have become ever more closely intertwined. Characterisation, in essence, connects the abstract material model with the real-world behaviour of the material in question. Characterisation of complex materials often requires a combination of experimental and computational techniques. The conference is convened biennially to facilitate the sharing of recent work between researchers who use computational methods, those who perform experiments, and those who do both, in all areas of materials characterisation.The papers cover such topics as: Computational models and experiments; Mechanical characterisation and testing; Micro and macro materials characterisation; Corrosion problems; Innovative experimental technologies; Recycled materials; Thermal analysis; Advances in composites; Cementitious materials; Structural health monitoring; Energy materials.

Computational Methods and Experiments

Materials Characterisation VI

A. Kungolos

Ēlias Beriatos

In recent years, in many countries there has been, an increase in spatial problems that has led to planning crisis. Planning problems often connected with uneven development, deterioration of the quality of urban life and destruction of the environment. The increase urbanisation of the world coupled with global issues of the environmental pollution, resource shortage and economic restructuring demand that we make our cities places worth living in. Problems of environmental management and planning are not restricted to urban areas. Environments such as rural areas, forests, coastal regions and mountains face their own problems that require urgent solutions in order to avoid irreversible damages. The use of modern technologies in planning gives us new potential to monitor and prevent environmental degradation. Effective strategies for management should consider planning and regional development, two closely related disciplines and emphasise the demand to handle these matters in an integrated way.Containing papers presented at the Third International Conference on Sustainable Development and Planning, this book addresses the subjects of regional development in an integrated way as well as in accordance with the principles of sustainability. Notable topics include: Regional Planning; City Planning; Rural Development; Environmental Impact Assessment; Environmental Management; Environmental Legislation and Policy; Integrated Territorial and Environmental Risk Analysis; Ecosystems Analysis; Protection and Remediation; Social and Cultural Issues; Environmental Economics; Geo-Informatics; Urban Landscapes; Transportation; Waste Management and Resources Management.

Sustainable Development and Planning III

J. C. F. Telles

L. C. Wrobel

VI SOCRATES: I think that we ought to stress that we will write only about things that we have first hand experience in, in a coherent way that will be useful to engineers and other scientists and stressing the formulation without being too mathematical. We should write with integrity and honesty, giving reference to other authors where reference is due, but avoiding mentioning everybody just to be certain that our book is widely advertised. Above all, the book should be clear and useful. PLATO: I think we should include a good discussion of fundamental ideas, of how integral equations are formed, pointing out that they are like two dimensional shadows of three dimensional objects, ... SOCRATES: Stop there! Remember you are not 'the' Plato! PLATO: Sorry, I was carried away. ARISTOTLE: I think that the book should have many applications so that the reader can learn by looking at them how to use the method. SOCRATES: I agree. But we should be careful. It is easy to include many illustra tions and examples in a book in order to disguise its meagre contents. All examples should be relevant. ARISTOTLE: And we should also include a full computer program to give the reader if so he wishes, a working experience of the technique.

Theory and Applications in Engineering

Boundary Element Techniques

conference topics are: Urban Transport Planning and Management; Transport Demand Analysis; Traffic Integration and Control; Intelligent Transport Systems; Transport Modelling and Simulation; Land Use and Transport Integration; Public Transport Systems; Environmental and Ecological Aspects; Air and Noise Pollution; Safety and Security." --Book Jacket.

Urban Transport and the Environment

Urban Transport XV

Containing research on recent technological and scientific developments associated with the management of surface and sub-surface water, this book consists of papers presented at the Seventh International Conference on Water Resources Management,. The biennial conference, first held in 1991, is one of several water-related conferences organised by the Wessex Institute of Technology. We have reached a point where water has become quite a precious resource, with communities around the world struggling to ensure adequate supply to their people. The research shared in this volume is an important contribution to the body of literature on the topic.The research covers: Water management and planning; The right to water and sanitation; Waste water treatment and re-use; Water markets, policies and contracts; Climate change; Irrigation; Urban water management; Hydraulic engineering; Water quality; Pollution contaminants and control; River basin management; Flood risk; Wetlands; Regional and geo-politics of water; Water resources and economics; Government and regulations.

Water Resources Management VII

This book contains the papers presented at two conferences organized by the Wessex Institute of Technology. The first conference is the Seventh International Conference on Computer Simulation in Risk Analysis and Hazard Mitigation, being held in Algarve, Portugal, September 13-15. This biennial conference is the latest in a successful series that began in 1998 and that includes many practical applications, demonstrating how to analyze and manage risk and mitigate hazards. The applications cover man-made as well as natural hazards, the importance of which is becoming increasingly evident in our modern world. These problems have become a priority for all governments, as well as a cause for public concern. The second conference is the Fifth International Conference on Prevention, Assessment, Rehabilitation and Development of Brownfield Sites, also being held in Algarve, September 14-16. The biennial conference was first held in 2002 and covers the challenges the public and private sectors must face in seeking to reuse brownfield sites and to capitalize on the opportunities.

Risk Analysis VII & Brownfields V

P. Anagnostopoulos

These proceedings contain late-1990s research on the computer modelling of seas and coastal regions under normal and extreme conditions, with special attention to the environmental problems of coastal areas. Topics covered include shallow water models, pollutant transport and dispersion, sewage and chemical pollution, wave propagation, harbours and marinas, coastal erosion, sea defence and protection systems, underwater dunes, coastal lakes and lagoons, oil slicks and atmospheric effects.

Coastal Engineering and Marina Developments

N. Tomii

Bin Ning

These conference proceedings update the use of computer-based techniques, promoting their general awareness throughout the business management, design, manufacture and operation of railways and other advanced passenger, freight and transport systems.

Computers in Railways 12

S. Hernandez

Engineering design is enhanced by adding optimisation methods. Their influence cannot be over-emphasised. The resulting solutions provide an efficient way of dealing with some of the most difficult challenges in engineering practice today.Containing papers presented at the Tenth International Conference on this successful series on Optimum Design in Engineering, this book examines the recent development in advanced types of structures, particularly those based on new concepts and new types of materials resulting in optimum solutions. Particular emphasis is placed on computational methods to model, control and manage new structural solutions and material types. Featured topics include: Optimisation and Manufacturing; Structural Optimisation; Optimisation in Biomechanics; Shape and Topology Optimisation; Industrial examples of Design Optimisation; Fluid Structure Interaction; Damage and Fracture Mechanics; Composite Materials Optimisation; Optimum behavior of Fiber Reinforced Polymers; Aerospace Structures; Applications in Mechanical and car engineering; New Algorithms.

Computer Aided Optimum Design in Engineering X

E. Alarcón

Proceedings of the 2nd International Conference, Held at the Madrid Polytechnic University, Spain, September, 1978

Applied Numerical Modelling

This book contains the papers presented at the nineteenth annual International Conference on Urban Transport and the Environment. The papers cover research on how to minimise ecological and environmental impacts from urban transportation systems, make them sustainable, and use them to improve the socio-economic fabric of the city. Papers also address the concerns about the safety, security and efficiency of the systems.Topics covered include: Urban transport planning and Management; Transportation demand analysis; Traffic integration and control; Intelligent transport systems; Transport modelling and simulation; Land use and transport integration; Public transport systems; Environmental and ecological aspects; Air and noise pollution; Safety and security; Energy and transport fuels; Economic and social impact; and Advanced transport systems.

C. A. Brebbia

About

Books

Join the club