Georges Gielen

Willy M.C. Sansen

It is a great honor to provide a few words of introduction for Dr. Georges Gielen's and Prof. Willy Sansen's book "Symbolic analysis for automated design of analog integrated circuits". The symbolic analysis method presented in this book represents a significant step forward in the area of analog circuit design. As demonstrated in this book, symbolic analysis opens up new possibilities for the development of computer-aided design (CAD) tools that can analyze an analog circuit topology and automatically size the components for a given set of specifications. Symbolic analysis even has the potential to improve the training of young analog circuit designers and to guide more experienced designers through second-order phenomena such as distortion. This book can also serve as an excellent reference for researchers in the analog circuit design area and creators of CAD tools, as it provides a comprehensive overview and comparison of various approaches for analog circuit design automation and an extensive bibliography. The world is essentially analog in nature, hence most electronic systems involve both analog and digital circuitry. As the number of transistors that can be integrated on a single integrated circuit (IC) substrate steadily increases over time, an ever increasing number of systems will be implemented with one, or a few, very complex ICs because of their lower production costs.

Symbolic Analysis for Automated Design of Analog Integrated Circuits

Johan Huijsing

Rudy J. van de Plassche

Johan H. Huijsing This book contains 18 tutorial papers concentrated on 3 topics, each topic being covered by 6 papers. The topics are: Low-Noise, Low-Power, Low-Voltage Mixed-Mode Design with CAD Tools Voltage, Current, and Time References The papers of this book were written by top experts in the field, currently working at leading European and American universities and companies. These papers are the reviewed versions of the papers presented at the Workshop on Advances in Analog Circuit Design. which was held in Villach, Austria, 26-28 April 1995. The chairman of the Workshop was Dr. Franz Dielacher from Siemens, Austria. The program committee existed of Johan H. Huijsing from the Delft University of Technology, Prof.Willy Sansen from the Catholic University of Leuven, and Dr. Rudy 1. van der Plassche from Philips Eindhoven. This book is the fourth of aseries dedicated to the design of analog circuits. The topics which were covered earlier were: Operational Amplifiers Analog to Digital Converters Analog Computer Aided Design Mixed AlD Circuit Design Sensor Interface Circuits Communication Circuits Low-Power, Low-Voltage Integrated Filters Smart Power As the Workshop will be continued year by year, a valuable series of topics will be built up from all the important areas of analog circuit design. I hope that this book will help designers of analog circuits to improve their work and to speed it up.

Low-Noise, Low-Power, Low-Voltage; Mixed-Mode Design with CAD Tools; Voltage, Current and Time References

Analog Circuit Design

This book contains the extended and revised editions of all the talks of the ninth AACD Workshop held in Hotel Bachmair, April 11 - 13 2000 in Rottach-Egem, Germany. The local organization was managed by Rudolf Koch of Infineon Technologies AG, Munich, Germany. The program consisted of six tutorials per day during three days. Experts in the field presented these tutorials and state of the art information is communicated. The audience at the end of the workshop selects program topics for the following workshop. The program committee, consisting of Johan Huijsing of Delft University of Technology, Willy Sansen of Katholieke Universiteit Leuven and Rudy van de Plassche of Broadcom Netherlands BV Bunnik elaborates the selected topics into a three-day program and selects experts in the field for presentation. Each AACD Workshop has given rise to publication of a book by Kluwer entitled "Analog Circuit Design". A series of nine books in a row provides valuable information and good overviews of all analog circuit techniques concerning design, CAD, simulation and device modeling. These books can be seen as a reference to those people involved in analog and mixed signal design. The aim of the workshop is to brainstorm on new and valuable design ideas in the area of analog circuit design. It is the hope of the program committee that this ninth book continues the tradition of emerging contributions to the design of analog and mixed signal systems in Europe and the rest of the world.

High-Speed Analog-to-Digital Converters, Mixed Signal Design; PLLs and Synthesizers

This volume of Analog Circuit Design concentrates on three topics: Low-Power Low-Voltage Design; Integrated Filters, and Smart Power. The book comprises six papers on each topic written by internationally recognised experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into three parts: Part I, Low-Power Low-Voltage Design, describes the latest techniques for producing analog circuits with low-voltage low-power requirements. These circuits have an important role to play in the increasing trend towards portable products, where battery life is an important design factor. The papers cover design techniques for amplifiers, analog-to-digital converters, micro-power analog filters and medical devices. Part II, Integrated Filters, presents papers which detail nearly all known techniques to construct integrated filters. These filters all use resistors and capacitors to obtain the filtering function due to the low quality of inductors in silicon. Integration of the filtering function on chips is important to reduce system cost and provide greater accuracy. Part III, Smart Power, illustrates up-to-date techniques for implementing thermal detectors and protection networks to improve reliability and the lifetime of many analog devices. These devices are more specifically those with different analog blocks operating at different temperatures. Smart Power is thus never limited to circuit design only, but must also include packaging and cooling considerations; it is system design. Analog Circuit Design is an essential reference source for analog design engineers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes the book suitable for use in an advanced course.

Low-Power Low-Voltage, Integrated Filters and Smart Power

Geert Van der Plas

Willy Sansen

This text addresses the design methodologies and CAD tools available for the systematic design and design automation of analogue integrated circuits. Two complementary approaches discussed increase analogue design productivity, demonstrated throughout using design times of the different design experiments undertaken.

A Computer-Aided Design and Synthesis Environment for Analog Integrated Circuits

This volume of Analog Circuit Design concentrates on 3 topics: High-Speed Analog-to-Digital Converters, Mixed Signal Design and PLLs and Synthesizers. The book comprises 6 papers on each topic written by internationally recognized experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into 3 parts: Part I, High-Speed Analog-to-Digital Converters, describes the latest techniques for producing analog-to-digital converters for applications in disk drives, radio circuits, XDSL and super HiFi audio conversion. Converters having resolutions between 7-bit and 12-bit using CMOS techniques are presented. A 13-bit bandpass sigma-delta modulator for IF signal conversion concludes this part. Part II, Mixed Signal Design, presents papers that detail nearly all known techniques and design issues for mixed signal circuits using CAD tools. Applications for telecom, sigma-delta converters, systems-on-a-chip and RF circuitry are described. Part III, PLLs and Synthesizers, illustrates up-to-date techniques for combination of inductors on a CMOS chip together with PLL techniques to obtain low-noise frequency synthesizers for telecom applications. Special attention is paid to fractional N synthesizers using sigma-delta algorithms. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced design course.

This new book on Analog Circuit Design contains the revised contributions of all the tutorial speakers of the eight workshop AACD (Advances in Analog Circuit Design), which was held at Nice, France on March 23-25, 1999. The workshop was organized by Yves Leduc of TI Nice, France. The program committee consisted of Willy Sansen, K.U.Leuven, Belgium, Han Huijsing, T.U.Delft, The Netherlands and Rudy van de Plassche, T.U.Eindhoven, The Netherlands. The aim of these AACD workshops is to bring together a restricted group of about 100 people who are personally advancing the frontiers of analog circuit design to brainstorm on new possibilities and future developments in a restricted number of fields. They are concentrated around three topics. In each topic six speakers give a tutorial presentation. Eighteen papers are thus included in this book. The topics of 1999 are: (X)DSL and other communication systems RF MOST models Integrated filters and oscillators The other topics, which have been coverd before, are: 1992 Operational amplifiers A-D Converters Analog CAD 1993 Mixed-mode A+D design Sensor interfaces Communication circuits 1994 Low-power low-voltage design Integrated filters Smart power 1995 Low-noise low-power low-voltge design Mixed-mode design with CAD tools Voltage, current and time references vii viii 1996 RF CMOS circuit design Bandpass sigma-delta and other data converters Translinear circuits 1997 RF A-D Converters Sensor and actuator interfaces Low-noise oscillators, PLL's and synthesizers 1998 I-Volt electronics Design and implementation of mixed-mode systems Low-noise amplifiers and RF power amplifiers for telecommunications

(X)DSL and other Communication Systems; RF MOST Models; Integrated Filters and Oscillators

This volume of Analog Circuit Design concentrates on three topics: Volt Electronics; Design and Implementation of Mixed-Mode Systems; Low-Noise and RF Power Amplifiers for Telecommunication. The book comprises six papers on each topic written by internationally recognised experts. These papers are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I, Volt Electronics, presents some of the circuit design challenges which are having to be met as the need for more electronics on a chip forces smaller transistor dimensions, and thus lower breakdown voltages. The papers cover techniques for 1-Volt electronics. Part II, Design and Implementation of Mixed-Mode Systems, deals with the various problems that are encountered in mixed analog-digital design. In the future, all integrated circuits are bound to contain both digital and analog sub-blocks. Problems such as substrate bounce and other substrate coupling effects cause deterioration in signal integrity. Both aspects of mixed-signal design have been addressed in this section and it illustrates that careful layout techniques embedded in a hierarchical design methodology can allow us to cope with most of the challenges presented by mixed analog-digital design. Part III, Low-noise and RF Power Amplifiers for Telecommunication, focuses on telecommunications systems. In these systems low-noise amplifiers are front-ends of receiver designs. At the transmitter part a high-performance, high-efficiency power amplifier is a critical design. Examples of both system parts are described in this section. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced course.

Volt Electronics; Mixed-Mode Systems; Low-Noise and RF Power Amplifiers for Telecommunication

Piet Wambacq

The analysis and prediction of nonlinear behavior in electronic circuits has long been a topic of concern for analog circuit designers. The recent explosion of interest in portable electronics such as cellular telephones, cordless telephones and other applications has served to reinforce the importance of these issues. The need now often arises to predict and optimize the distortion performance of diverse electronic circuit configurations operating in the gigahertz frequency range, where nonlinear reactive effects often dominate. However, there have historically been few sources available from which design engineers could obtain information on analysis tech niques suitable for tackling these important problems. I am sure that the analog circuit design community will thus welcome this work by Dr. Wambacq and Professor Sansen as a major contribution to the analog circuit design literature in the area of distortion analysis of electronic circuits. I am personally looking forward to hav ing a copy readily available for reference when designing integrated circuits for communication systems.

Distortion Analysis of Analog Integrated Circuits

Rudy J. van der Plassche

Many interesting design trends are shown by the six papers on operational amplifiers (Op Amps). Firstly. there is the line of stand-alone Op Amps using a bipolar IC technology which combines high-frequency and high voltage. This line is represented in papers by Bill Gross and Derek Bowers. Bill Gross shows an improved high-frequency compensation technique of a high quality three stage Op Amp. Derek Bowers improves the gain and frequency behaviour of the stages of a two-stage Op Amp. Both papers also present trends in current-mode feedback Op Amps. Low-voltage bipolar Op Amp design is presented by leroen Fonderie. He shows how multipath nested Miller compensation can be applied to turn rail-to-rail input and output stages into high quality low-voltage Op Amps. Two papers on CMOS Op Amps by Michael Steyaert and Klaas Bult show how high speed and high gain VLSI building blocks can be realised. Without departing from a single-stage OT A structure with a folded cascode output, a thorough high frequency design technique and a gain-boosting technique contributed to the high-speed and the high-gain achieved with these Op Amps. . Finally. Rinaldo Castello shows us how to provide output power with CMOS buffer amplifiers. The combination of class A and AB stages in a multipath nested Miller structure provides the required linearity and bandwidth.

Willy M.C. Sansen

About

Books

Join the club