Andreas Öchsner

Graeme E. Murch

Ali Shokuhfar

João Delgado

The present volume attempts to capture some of this excitement by providing a cross-section of contemporary research in mass transfer and thermal processes in the modern engineering materials and technologies. The volume spans both experiment and modelling and covers both basic research and applied research. Topics covered are broad, covering heat exchange in porous media to the drying of sisal fibre, from the role of nanoparticles for enhanced oil recovery to the atomistic of grain boundary diffusion and segregation.

New Perspectives on Mass and Thermal Transport in Engineering Materials

João M.P.Q. Delgado

This is special topic volume Recent Trends in Mass Transport in Solids and Liquids focuses on the mass transport in its broadest sense spanning the atomic scale right up to the macro scale. There is also a special focus on real engineering applications of mass transport.

Recent Trends in Mass Transport in Solids and Liquids

This book provides a profound understanding, which physical processes and mechanisms cause the heat transfer in composite and cellular materials. It shows models for all important classes of composite materials and introduces into the latest advances. In three parts, the book covers Composite Materials (Part A), Porous and Cellular Materials (Part B) and the appearance of a conjoint solid phase and fluid aggregate (Part C).

Heat Transfer in Multi-Phase Materials

Ardiyansyah Syahrom

Mohammed Rafiq Abdul Kadir

Fakhrizal Azmy Nasruddin

Muhamad Noor Harun

Abdul Hafidz Omar

This work identifies the characteristics of racket design parameters that influence racket performance. It presents the finite element analysis of several designs of badminton rackets and compares them to experimental results for validation. Designing a racket requires a comprehensive understanding of racket performance characteristics. Essentially, racket performance is related to the sweet spot, which is the spot on the racket head that produces the most power and control when it strikes a shuttlecock. Determining a coefficient of restitution can help to identify the sweet spot on a racket. By analyzing several head shape designs, it becomes apparent that isometric head shape rackets produce better coefficients of restitution compared to oval and round ones. It is recommended that the racket design consist of low string tension, stiffer racket shafts and bigger head size in order to produce higher shuttlecock speed.

Finite Element Analysis on Badminton Racket Design Parameters

Azman Ismail

Wardiah Mohd Dahalan

This book presents the outcomes from the 2nd International Conference on Marine and Advanced Technologies 2021 (Icmat2021) which was organized by the Research and Innovation section, University Kuala Lumpur - Malaysian Institute of Marine Engineering Technology. The theme “Propelling to the Innovative Idea” highlights prominence of recent developments in marine and advanced technologies in the field of marine application, maritime operation, energy and reliability, advanced materials and applied science. This online conference provided a platform for presentations and discussions at the local and international level between educationists, researchers, students, and industrialists. Furthermore, it created opportunities to establish networks and meet experts in addition to exchange of up-to-date knowledge in the field. This book is the up-to-date reference, especially to those who want to learn and explore more about the latest developments and technologies of maritime industries.

Papers from the ICMAT 2021

Advanced Maritime Technologies and Applications

Fatin Nur Zulkipli

Zalizah Awang Long

This book describes common applied problems that are solved with the use of digital technology. The digital technology has simplified most of our daily activities. Technology has been improving our quality of life where human capability alone is insufficient enough to be utilized. For any challenging tasks, digital technology helps to solve it in very efficient ways and thousands of them are solved on a daily basis without much notice in the public. Software and IT technology let us to complete tasks in just a moment that took days without this technical support. In that sense, this book presents several examples on how software- and IT-based solutions were successfully applied in solving actual engineering problems.

Advances in Technology Transfer Through IoT and IT Solutions

This book reports on various real-world and global engineering problems while touching on evolving design strategies. The chapters were selected from the 2nd International Conference on Marine and Advanced Technologies 2021 (ICMAT 2021). The papers discuss best practice and theory in relation to multi-disciplinary approaches in materials engineering technology. Among the topics are advanced materials, applied science, marine engineering and energy application.

Advanced Materials and Engineering Technologies

Holm Altenbach

This special anniversary book celebrates the success of this Springer book series highlighting materials modeling as the key to developing new engineering products and applications. In this 100th volume of “Advanced Structured Materials”, international experts showcase the current state of the art and future trends in materials modeling, which is essential in order to fulfill the demanding requirements of next-generation engineering tasks.

State of the Art and Future Trends in Material Modeling

This book uses a novel concept to teach the finite element method, applying it to solid mechanics. This major conceptual shift takes away lengthy theoretical derivations in the face-to-face interactions with students and focuses on the summary of key equations and concepts; and to practice these on well-chosen example problems. For this new, 2nd edition, many examples and design modifications have been added, so that the learning-by-doing features of this book make it easier to understand the concepts and put them into practice. The theoretical derivations are provided as additional reading and students must study and review the derivations in a self-study approach. The book provides the theoretical foundations to solve a comprehensive design project in tensile testing. A classical clip-on extensometer serves as the demonstrator on which to apply the provided concepts. The major goal is to derive the calibration curve based on different approaches, i.e., analytical mechanics and based on the finite element method, and to consider further design questions such as technical drawings, manufacturing, and cost assessment. Working with two concepts, i.e., analytical and computational mechanics strengthens the vertical integration of knowledge and allows the student to compare and understand the different concepts, as well as highlighting the essential need for benchmarking any numerical result.

A Project-Based Introduction to Computational Statics

This book offers an update on recent developments in modern engineering design. Different engineering disciplines, such as mechanical, materials, computer and process engineering, provide the foundation for the design and development of improved structures, materials and processes. The modern design cycle is characterized by the interaction between various disciplines and a strong shift to computer-based approaches where only a few experiments are conducted for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also linked to environmental demands. In the transportation industry (e.g. automotive or aerospace), the demand for higher fuel efficiency is related to reduced operational costs and less environmental damage. One way to fulfil such requirements is lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health and medical sector.

Structures, Materials and Processes

Engineering Design Applications II

Hamid Reza Rezaie

Hassan Beigi Rizi

Mojdeh Mahdi Rezaei Khamseh

This book discusses the current biomaterials used for dental applications and the basic sciences underpinning their application. The most critical structures in the oral cavity are the teeth, which play a central role in speaking, biting, chewing, tasting and swallowing. Teeth consist of three types of tissue: the cementum, enamel and dentin, with bone and gingival tissue serving as supporting structures. Caries, tooth wear, trauma and mechanical defects can lead to severe facial conditions; however, correcting these defects remains a challenge for scientists and dentists. Presenting insights form a broad range of disciplines, including materials science, biology, physiology and clinical science, this book provides a timely review of the principles, processing and application of dental materials.

A Review on Dental Materials

The finite element method is a powerful tool even for non-linear materials’ modeling. But commercial solutions are limited and many novel materials do not follow standard constitutive equations on a macroscopic scale. Thus, is it required that new constitutive equations are implemented into the finite element code. However, it is not sufficient to simply implement only the equations but also an appropriate integration algorithm for the constitutive equation must be provided. This book is restricted to one-dimensional plasticity in order to reduce and facilitate the mathematical formalism and theory and to concentrate on the basic ideas of elasto-plastic finite element procedures. A comprehensive set of completely solved problems is designed for the thorough understand of the presented theory. After working with this new book and reviewing the provided solved and supplementary problems, it should be much easier to study and understand the advanced theory and the respective text books.

Modeling and Simulation of Rods and Beams

Elasto-Plasticity of Frame Structure Elements

This book “Advanced Engineering for Processes and Technologies II” provides a good platform for participating researchers and academicians to share their latest innovation, technology and research findings in the areas of marine engineering technology and applications, sea management as well as engineering education. It offers an opportunity for academicians of the Universiti Kuala Lumpur, Malaysian Institute of Marine Engineering Technology (UniKL MIMET) to exchange ideas and establish a professional network. There are more than 30 papers covering a wide range of topics related to technologies and education including simulation, intellectual discussion, environmental awareness, enhancement of knowledge and skills. The aim of this book focuses more on the numerous technological methods used for the establishment of engineering innovation and productivity through their competitive research findings and the exposure of their relative merits and limitations. The papers shared in this issue will enable other researchers to generate interest and novel ideas that can lead to the discovery of new engineering knowledge.

Advanced Engineering for Processes and Technologies II

This book presents the latest advances in mechanical and materials engineering applied to the machining, joining and modification of modern engineering materials. The contributions cover the classical fields of casting, forming and injection moulding as representative manufacturing methods, whereas additive manufacturing methods (rapid prototyping and laser sintering) are treated as more innovative and recent technologies that are paving the way for the manufacturing of shapes and features that traditional methods are unable to deliver. The book also explores water jet cutting as an innovative cutting technology that avoids the heat build-up typical of classical mechanical cutting. It introduces readers to laser cutting as an alternative technology for the separation of materials, and to classical bonding and friction stir welding approaches in the context of joining technologies. In many cases, forming and machining technologies require additional post-treatment to achieve the required level of surface quality or to furnish a protective layer. Accordingly, sections on laser treatment, shot peening and the production of protective layers round out the book’s coverage.

Machining, Joining and Modifications of Advanced Materials

Marcelo J. S. de Lemos

Providing the reader with a solid understanding of the fundamentals as well as an awareness of recent advances in properties and applications of cellular and porous materials, this handbook and ready reference covers all important analytical and numerical methods for characterizing and predicting thermal properties. In so doing it directly addresses the special characteristics of foam-like and hole-riddled materials, combining theoretical and experimental aspects for characterization purposes.

Thermal Properties Simulation and Prediction

Cellular and Porous Materials

Waqar Ahmed

This monograph assembles expert knowledge on the latest biomechanical modeling and testing of hard tissues, coupled with a concise introduction to the structural and physical properties of bone and cartilage. A strong focus lies on the current advances in understanding bone structure and function from a materials science perspective, providing practical knowledge on how to model, simulate and predict the mechanical behavior of bone. The book presents directly applicable methods for designing and testing the performance of artificial bones and joint replacements, while addressing innovative and safe approaches to stimulated bone regeneration essential for clinical researchers.

Modeling, Testing, and Materials

Biomechanics of Hard Tissues

Markus Merkel

This textbook presents finite element methods using exclusively one-dimensional elements. It presents the complex methodology in an easily understandable but mathematically correct fashion. The approach of one-dimensional elements enables the reader to focus on the understanding of the principles of basic and advanced mechanical problems. The reader will easily understand the assumptions and limitations of mechanical modeling as well as the underlying physics without struggling with complex mathematics. Although the description is easy, it remains scientifically correct. The approach using only one-dimensional elements covers not only standard problems but allows also for advanced topics such as plasticity or the mechanics of composite materials. Many examples illustrate the concepts and problems at the end of every chapter help to familiarize with the topics. Each chapter also includes a few exercise problems, with short answers provided at the end of the book. The second edition appears with a complete revision of all figures. It also presents a complete new chapter special elements and added the thermal conduction into the analysis of rod elements. The principle of virtual work has also been introduced for the derivation of the finite-element principal equation.

An Introduction to the FE Method

One-Dimensional Finite Elements

Muhamad Husaini Abu Bakar

Muhammad Al-Hapis Abdul Razak

This book contains a collection of peer-reviewed papers from the 2020 Conference on Multidisciplinary Engineering and Technology (COMET 2020) held online on December 15-16, 2020. It contains twenty-five papers covering energy harvester, thermodynamics, vibration, dynamic of mechanics, manufacturing process, computer-aided manufacturing (CAM), CFD analysis, electronics, and microcontroller. .

Progress in Engineering Technology IV

Resam Makvandi

This book is intended as an essential study aid for the finite element method. Based on the free computer algebra system Maxima, the authors offer routines for symbolically or numerically solving problems in the context of plane truss and frame structures, allowing readers to check classical ‘hand calculations’ on the one hand and to understand the computer implementation of the method on the other. The mechanical theories focus on the classical one-dimensional structural elements, i.e. bars, Euler–Bernoulli and Timoshenko beams, and their combination to generalized beam elements. Focusing on one-dimensional elements reduces the complexity of the mathematical framework, and the resulting matrix equations can be displayed with all components and not merely in the form of a symbolic representation. In addition, the use of a computer algebra system and the incorporated functions, e.g. for equation solving, allows readers to focus more on the methodology of the finite element method and not on standard procedures.

An Introduction Based on the Computer Algebra System Maxima

Finite Elements for Truss and Frame Structures

This book provides a study aid on the finite element method. Based on the free computer algebra system “Maxima”, it presents routines to symbolically or numerically solve problems in the context of plane truss and frame structures. This allows readers to not only check classical “hand calculations” but also understand the computer implementation of the method. The mechanical theories focus on the classical one-dimensional structural elements, i.e. bars, Euler–Bernoulli and Timoshenko beams as well as their combination to generalized beam elements. Focusing on one-dimensional elements reduces the complexity of the mathematical framework and the resulting matrix equations can still be displayed with all components, and not only in a symbolic representation. The use of a computer algebra system and the incorporated functions, e.g. for equation solving, highlights the methodology of the finite element method rather than standard procedures. The book is based on the Springer Brief “Finite Elements for Truss and Frame Structures” (978-3-319-94940-6) by the same authors.

Andreas Öchsner

About

Books

Join the club